/themes/plugins/fancybox/css/fancybox.css
Camiones Cabezas tractoras Semirremolques Furgonetas Camiones volquetes Camiones plataforma Camiones furgón Camiones frigoríficos Caja cerrada Con volquete Autobuses Autocares
Subastas Alquiler Soluciones y Socios AR Idiomas
Menú principal
Menú principal
Soluciones y Socios
Comprar
Vender
Enlaces útiles
Acerca de Via Mobilis
Hola, identifíquese por favor
Stats
 Volver a buscar
Semirremolque Fliegl
Semirremolque Fliegl

Semirremolque volquete fondo móvil Fliegl SDS390 nuevo

  • 07819 Triptis
  • Fliegl
Semirremolques Volquete
Información principal
Ref. cliente : Produktpalette
Ref. web : 11509165
Carrocería Volquete
Bajo carrocería Fondo móvil
Marca Fliegl
Gama (marca : Fliegl) SDS390
Estado Nuevo
Año -
Fecha 1ª matriculación
País ALEMANIA
Constructor Fliegl
Caja de cambios y transmisión
Precisiones caja de cambiosBoîte automatique
Equipamiento Semirremolque Fliegl
  • Suspensión Neumática
  • EBS
Neumáticos
Estado y dimensiones de los neumáticos100 %
Dimensiones
Volumen0.092 m³
Comentarios
Localisation :
  •  Allemagne Triptis
Carrosserie :
  •  longueur - 13,46 m, largeur - 2,47 m
Informations supplémentaires :
  •  gris


Description: Walking floor
Functionality: fully functional
Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland
1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h)
Note: A 2-circuit hydraulic system is required!
Flow rate: 110 l/min
Pressure: 250 bar
Minimum oil tank filling: 100 l
Achsenkonfiguration: 3 axles
Additional information
Chassis
Fine-grained steel welded construction in lightweight design
extending to the support legs
kingpin plate with 2 replaceable kingpins
Lateral floor preparation for lashing eyes
24-ton
two-speed support legs
single-sided operation
with straight lower part
without shock absorption
Extendable ladder at the rear
Door latch on the side
2 wheel chocks with holder
Aluminum side impact protection
Steel underrun protection with wide Fliegl mud flaps
foldable mudguard for lighting unit
Quarter panel fenders
Rear impact protection
Aluminum ladder approx. 3,550 mm
with holder on the side
Tarpaulin rod with holder
1 plastic toolbox
with drawer and insert
b=650 / h=520 / d=670 mm
lockable with a padlock (padlock not included)
1 spare wheel holder for 1 spare wheel
with wheel fastening kit
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter
Axle/suspension laser-aligned to reduce tire wear and fuel consumption
Braking system
2-line compressed air braking system
color-coded lines for easy maintenance
Spring brake parking brake
2 fail-safe coupling heads at the front
without connection line
Electronic Braking System with EBS socket at the front
without connection cable
With raise and lower valve
Vehicle - Driving stability system
Wheels and tires
385/55 R22.5
according to manufacturer''s choice
Steel rims
factory silver
Electrical system
24 Volt
multi-chamber lights
yellow LED lighting on the side
2 white position lights at the front
2 white/red side marker lights at the rear
2 x 7-pin and 1 x 15-pin fail-safe sockets at the front
without connection cable
Hydraulic cylinder with sliding mechanism installed in the floor
2-circuit hydraulic system
Switching between forward/backward movement electrically via remote control with cable
Sliding floor power supply via parking lights
Actuation hydraulically via truck PTO
Nsbyr Rei Riywsbgyswk
Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm
Recommended pump output
Sliding floor
Sliding floor with wear plate at the rear
Floor boards made of aluminum
8 mm floor profile
ribbed design
Tipping body
Aluminum tipping body made of high-quality
abrasion-resistant material. Front and side walls made of aluminum hollow profiles
welded together at the top all around with a wide special reinforcement profile made of aluminum
welded to a special frame at the bottom
Sliding wall for better unloading of the load
with reinforced tarpaulin flaps at the bottom
with rail cleaner
Rear wall made of aluminum hollow profiles
as a 2-wing door
with a division of 1/2 to 1/2
framed all around with a special U-profile with stop and rubber seal
with 2 pieces of externally mounted swivel bolts
locked at the top and bottom. Rear wall with mechanical safety locking
operation at the rear on the driver''s side. With pivoting crossbar at the top. The door locks can be locked with a padlock
Standing platform with access ladder on both sides in driving direction left/right and railing
for opening
Ver todo
Comentarios
Localisation :
  •  Allemagne Triptis
Carrosserie :
  •  longueur - 13,46 m, largeur - 2,47 m
Informations supplémentaires :
  •  gris


Description: Walking floor
Functionality: fully functional
Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland
1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h)
Note: A 2-circuit hydraulic system is required!
Flow rate: 110 l/min
Pressure: 250 bar
Minimum oil tank filling: 100 l
Achsenkonfiguration: 3 axles
Additional information
Chassis
Fine-grained steel welded construction in lightweight design
extending to the support legs
kingpin plate with 2 replaceable kingpins
Lateral floor preparation for lashing eyes
24-ton
two-speed support legs
single-sided operation
with straight lower part
without shock absorption
Extendable ladder at the rear
Door latch on the side
2 wheel chocks with holder
Aluminum side impact protection
Steel underrun protection with wide Fliegl mud flaps
foldable mudguard for lighting unit
Quarter panel fenders
Rear impact protection
Aluminum ladder approx. 3,550 mm
with holder on the side
Tarpaulin rod with holder
1 plastic toolbox
with drawer and insert
b=650 / h=520 / d=670 mm
lockable with a padlock (padlock not included)
1 spare wheel holder for 1 spare wheel
with wheel fastening kit
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter
Axle/suspension laser-aligned to reduce tire wear and fuel consumption
Braking system
2-line compressed air braking system
color-coded lines for easy maintenance
Spring brake parking brake
2 fail-safe coupling heads at the front
without connection line
Electronic Braking System with EBS socket at the front
without connection cable
With raise and lower valve
Vehicle - Driving stability system
Wheels and tires
385/55 R22.5
according to manufacturer''s choice
Steel rims
factory silver
Electrical system
24 Volt
multi-chamber lights
yellow LED lighting on the side
2 white position lights at the front
2 white/red side marker lights at the rear
2 x 7-pin and 1 x 15-pin fail-safe sockets at the front
without connection cable
Hydraulic cylinder with sliding mechanism installed in the floor
2-circuit hydraulic system
Switching between forward/backward movement electrically via remote control with cable
Sliding floor power supply via parking lights
Actuation hydraulically via truck PTO
Nsbyr Rei Riywsbgyswk
Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm
Recommended pump output
Sliding floor
Sliding floor with wear plate at the rear
Floor boards made of aluminum
8 mm floor profile
ribbed design
Tipping body
Aluminum tipping body made of high-quality
abrasion-resistant material. Front and side walls made of aluminum hollow profiles
welded together at the top all around with a wide special reinforcement profile made of aluminum
welded to a special frame at the bottom
Sliding wall for better unloading of the load
with reinforced tarpaulin flaps at the bottom
with rail cleaner
Rear wall made of aluminum hollow profiles
as a 2-wing door
with a division of 1/2 to 1/2
framed all around with a special U-profile with stop and rubber seal
with 2 pieces of externally mounted swivel bolts
locked at the top and bottom. Rear wall with mechanical safety locking
operation at the rear on the driver''s side. With pivoting crossbar at the top. The door locks can be locked with a padlock
Standing platform with access ladder on both sides in driving direction left/right and railing
for opening
Tarifa de venta
Precio bajo pedido Pedir el precio al vendedor
Semirremolques Volquete
Información principal
Ref. cliente : Produktpalette
Ref. web : 11509165
Carrocería Volquete
Bajo carrocería Fondo móvil
Marca Fliegl
Gama (marca : Fliegl) SDS390
Estado Nuevo
Año -
Fecha 1ª matriculación
País ALEMANIA
Constructor Fliegl
Caja de cambios y transmisión
Precisiones caja de cambiosBoîte automatique
Equipamiento Semirremolque Fliegl
  • Suspensión Neumática
  • EBS
Neumáticos
Estado y dimensiones de los neumáticos100 %
Dimensiones
Volumen0.092 m³
Comentarios
Localisation :
  •  Allemagne Triptis
Carrosserie :
  •  longueur - 13,46 m, largeur - 2,47 m
Informations supplémentaires :
  •  gris


Description: Walking floor
Functionality: fully functional
Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland
1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h)
Note: A 2-circuit hydraulic system is required!
Flow rate: 110 l/min
Pressure: 250 bar
Minimum oil tank filling: 100 l
Achsenkonfiguration: 3 axles
Additional information
Chassis
Fine-grained steel welded construction in lightweight design
extending to the support legs
kingpin plate with 2 replaceable kingpins
Lateral floor preparation for lashing eyes
24-ton
two-speed support legs
single-sided operation
with straight lower part
without shock absorption
Extendable ladder at the rear
Door latch on the side
2 wheel chocks with holder
Aluminum side impact protection
Steel underrun protection with wide Fliegl mud flaps
foldable mudguard for lighting unit
Quarter panel fenders
Rear impact protection
Aluminum ladder approx. 3,550 mm
with holder on the side
Tarpaulin rod with holder
1 plastic toolbox
with drawer and insert
b=650 / h=520 / d=670 mm
lockable with a padlock (padlock not included)
1 spare wheel holder for 1 spare wheel
with wheel fastening kit
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter
Axle/suspension laser-aligned to reduce tire wear and fuel consumption
Braking system
2-line compressed air braking system
color-coded lines for easy maintenance
Spring brake parking brake
2 fail-safe coupling heads at the front
without connection line
Electronic Braking System with EBS socket at the front
without connection cable
With raise and lower valve
Vehicle - Driving stability system
Wheels and tires
385/55 R22.5
according to manufacturer''s choice
Steel rims
factory silver
Electrical system
24 Volt
multi-chamber lights
yellow LED lighting on the side
2 white position lights at the front
2 white/red side marker lights at the rear
2 x 7-pin and 1 x 15-pin fail-safe sockets at the front
without connection cable
Hydraulic cylinder with sliding mechanism installed in the floor
2-circuit hydraulic system
Switching between forward/backward movement electrically via remote control with cable
Sliding floor power supply via parking lights
Actuation hydraulically via truck PTO
Nsbyr Rei Riywsbgyswk
Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm
Recommended pump output
Sliding floor
Sliding floor with wear plate at the rear
Floor boards made of aluminum
8 mm floor profile
ribbed design
Tipping body
Aluminum tipping body made of high-quality
abrasion-resistant material. Front and side walls made of aluminum hollow profiles
welded together at the top all around with a wide special reinforcement profile made of aluminum
welded to a special frame at the bottom
Sliding wall for better unloading of the load
with reinforced tarpaulin flaps at the bottom
with rail cleaner
Rear wall made of aluminum hollow profiles
as a 2-wing door
with a division of 1/2 to 1/2
framed all around with a special U-profile with stop and rubber seal
with 2 pieces of externally mounted swivel bolts
locked at the top and bottom. Rear wall with mechanical safety locking
operation at the rear on the driver''s side. With pivoting crossbar at the top. The door locks can be locked with a padlock
Standing platform with access ladder on both sides in driving direction left/right and railing
for opening
Ver todo
Comentarios
Localisation :
  •  Allemagne Triptis
Carrosserie :
  •  longueur - 13,46 m, largeur - 2,47 m
Informations supplémentaires :
  •  gris


Description: Walking floor
Functionality: fully functional
Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland
1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h)
Note: A 2-circuit hydraulic system is required!
Flow rate: 110 l/min
Pressure: 250 bar
Minimum oil tank filling: 100 l
Achsenkonfiguration: 3 axles
Additional information
Chassis
Fine-grained steel welded construction in lightweight design
extending to the support legs
kingpin plate with 2 replaceable kingpins
Lateral floor preparation for lashing eyes
24-ton
two-speed support legs
single-sided operation
with straight lower part
without shock absorption
Extendable ladder at the rear
Door latch on the side
2 wheel chocks with holder
Aluminum side impact protection
Steel underrun protection with wide Fliegl mud flaps
foldable mudguard for lighting unit
Quarter panel fenders
Rear impact protection
Aluminum ladder approx. 3,550 mm
with holder on the side
Tarpaulin rod with holder
1 plastic toolbox
with drawer and insert
b=650 / h=520 / d=670 mm
lockable with a padlock (padlock not included)
1 spare wheel holder for 1 spare wheel
with wheel fastening kit
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter
Axle/suspension laser-aligned to reduce tire wear and fuel consumption
Braking system
2-line compressed air braking system
color-coded lines for easy maintenance
Spring brake parking brake
2 fail-safe coupling heads at the front
without connection line
Electronic Braking System with EBS socket at the front
without connection cable
With raise and lower valve
Vehicle - Driving stability system
Wheels and tires
385/55 R22.5
according to manufacturer''s choice
Steel rims
factory silver
Electrical system
24 Volt
multi-chamber lights
yellow LED lighting on the side
2 white position lights at the front
2 white/red side marker lights at the rear
2 x 7-pin and 1 x 15-pin fail-safe sockets at the front
without connection cable
Hydraulic cylinder with sliding mechanism installed in the floor
2-circuit hydraulic system
Switching between forward/backward movement electrically via remote control with cable
Sliding floor power supply via parking lights
Actuation hydraulically via truck PTO
Nsbyr Rei Riywsbgyswk
Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm
Recommended pump output
Sliding floor
Sliding floor with wear plate at the rear
Floor boards made of aluminum
8 mm floor profile
ribbed design
Tipping body
Aluminum tipping body made of high-quality
abrasion-resistant material. Front and side walls made of aluminum hollow profiles
welded together at the top all around with a wide special reinforcement profile made of aluminum
welded to a special frame at the bottom
Sliding wall for better unloading of the load
with reinforced tarpaulin flaps at the bottom
with rail cleaner
Rear wall made of aluminum hollow profiles
as a 2-wing door
with a division of 1/2 to 1/2
framed all around with a special U-profile with stop and rubber seal
with 2 pieces of externally mounted swivel bolts
locked at the top and bottom. Rear wall with mechanical safety locking
operation at the rear on the driver''s side. With pivoting crossbar at the top. The door locks can be locked with a padlock
Standing platform with access ladder on both sides in driving direction left/right and railing
for opening
Tarifa de venta
Precio bajo pedido Pedir el precio al vendedor

Fliegl Fahrzeugbau GmbH

07819 Triptis

ALLEMAGNE


tag-iconDesde hace 2 años en Argentina-Camiones.com

Vendedor
+49 (0)364 82 83 01 30

Via Mobilis se compromete a respetar los valores fundamentales de la reglamentación sobre la protección de datos personales.

Este sitio está protegido por reCAPTCHA. Se aplican las políticas de privacidad y condiciones de uso de Google.

  Consejos de seguridad  
Señalar el anuncio
Anuncios similares
21
Semirremolque volquete fondo móvil Reisch

Semirremolque volquete fondo móvil Reisch RSBS-35/24 LK *Walkingfloor/Schubboden *82 cbm *Getreide *BODEN TOP!

15,500 EUR sin IVA
2011
11
Semirremolque volquete Schmitz Cargobull

Semirremolque volquete Schmitz Cargobull Kipper Alukastenmulde 24m³

15,900 EUR sin IVA
36t 3 ejes 2018
15
Semirremolque volquete Langendorf

Semirremolque volquete Langendorf SKA-G 24/29 | ALU 47m³*Kombitür*Getreide*Lift

19,500 EUR sin IVA
35t 2014
16
Semirremolque volquete fondo móvil Carnehl

Semirremolque volquete fondo móvil Carnehl CSS/AL 90m³ Lift 7.760 Kg,

9,400 EUR sin IVA
36t 3 ejes 2012
14
Semirremolque volquete Schmitz Cargobull nuevo

Semirremolque volquete Schmitz Cargobull nuevo Kipper Alukastenmulde 25m³

45,500 EUR sin IVA
36t 3 ejes 2025 Nuevo
Visualización 1 sobre 4

Ir arriba